Tools for sale.

Contact Time Tested Tools to verify availability and order. I’ll invoice through PayPal

Buyer pays shipping.

Offers and trades always welcome.

If you need more information or want to see more pictures feel free to ask..

Shipping cost (US ONLY)

#4 and #5s fit in a medium flat rate box $11.35 each

A single block will usually fit in a small flat rat box. $5.35 each

For Anything larger or multiple orders contact me.

<<<<<<<**********************************************************************>>>>>>>>>>>

I can’t always keep this list up to date and often have a few items in the works. Contact me if you are looking for something in particular and its not listed.

Sharpening – Plane Irons Sizes 1 – 8  $8 plus shipping.  (does not include grinding out major chips or damages) $7 for each additional iron

Chisels – $6 plus shipping. (does not include grinding out major chips or damages) $5 for each additional.

Let me know if you’d like me to keep my eye open at the flea markets and antique shops for something in particular or a particular vintage.

---

---

Here is a list of planes ready to go. I’ll post picture if you need them. If its marked restored its been stripped and repainted with multiple coats of Dupli-Color Engine Enamel DUPDE1635 Ford Semi Gloss Black spray paint. Feel free to ask any questions.

• Unless otherwise marked, the iron has been hollow ground on an 8” or 10” white wheel, then honed on a hard oil stone.
• Back of the iron will be polished
• Knob and tote stripped and finished with BLO and/or wax if its rosewood. I typically use dark walnut Danish oil on hardwood.
• Sole is flat to a working degree.
• Frog has been flattened
• All restore and tuned planes have been tested.
• Planes marked “As found” are as I found them.

I will gladly tune and/or restore any as found items. Email for cost, but a ball park figure is $25 for tuning and an additional $15 if it needs to be painted.

Coming Soon

• Type 9ish #4 fully restored Stanley Smoother
• Stanley #45. Good shape. Basic parts all there. Set of cutters.
• Later type #4 1/2 fully restored.

---

---

• Stanley #3 type 15 as found. $45 (my#-3-040113-1) High knob, no patents, frog adjustment screw, large iron adjuster knob.The rear tote my not be original, high knob is good, rosewood. Nickel lever cap with orange background. Surface rust. Japanning is probably ok, No cracks chips or breaks anywhere. $25
• 
• ———————————
• ———————————
• Stanley 4c type 9 .(My reference dw008) Original japanning. Original rosewood. $45
• ———————————
• Unmarked #3 restored. dw0018. Light hardwood refinished. Probably a defiance. Nice user. $22
• ———————————
• Wards Master 4 made by Stanley (My reference W-050513-1) Repainted Fully tuned . Some minor pitting. It has the wartime rubber adjuster like the Stanley’s. $35
• 
• ———————————
• Handyman #4. Original hardwood. Tote repaired. Knob repaired. Original grey paint. $10
• ———————————

Stanley #4c type 9 .(My reference 4c-051913-1) Completely restored and tuned. Original rosewood (small chip on tote). Stripped and repainted. some pitting on the sides (see photos)   Type 9,  $45

 
• ———————————

Stanley #4c type 9 .(My reference 4-051713-1) Completely restored and tuned. Original rosewood (knob was cracked and epoxied). Tote has some exceptional grain color.  Stripped and repainted. some pitting on the sides (see photos). S casting   Type 7,  $50

 

———————————

Stanley #4 1/2 type 9 .(My reference 4.5-051913-1) Completely restored and tuned. Hardwood tote looks like a replacement, but in good shape. Original hardwood knob.  Stripped and repainted. Type 17,  $85

• ———————————
• Stanley #5C. Type 11. (my#-5-040113-2)Has 3 patents, low knob, small adjuster. The rear tote needs a replacement, Surface rust. Japanning needs to be redone. No cracks chips or breaks anywhere. Fully restored and tuned. Repainted. The third picture show factory stamped “DAMAGED”. It has some pitting, but no where’s that would cause any performance issue. Sole is good. Most of it is on the cap and upper part of the iron and chip breaker. $45
•  
• ———————————
• Stanley #5 as found. (my#-5-040113-1) The rear tote looks like a replacement, but wood is solid. Surface rust. Japanning needs to be redone. No cracks chips or breaks anywhere. $25
• 
• ———————————
• Stanley #6 as found. (my#-6-040113-1) Doesn’t seem to fit a type. Low knob, no patents, frog adjustment screw, large iron adjuster knob.The rear tote tip is broke off, low knob is good, both rosewood. Surface rust. Japanning is probably 85%. No cracks chips or breaks anywhere. It will make a fine user. $45

• ———————————
• Stanley #6 as found. $45 (my#-6-040113-2) Another one that Doesn’t seem to fit a type. High knob, no patents, frog adjustment screw, large iron adjuster knob.The rear tote tip is broke off, high knob is good, could be painted rosewood. Nickel lever cap with orange background. Surface rust. Japanning is probably rough, probably need repainting. No cracks chips or breaks anywhere. $45

• ——————————— ———————————
• Stanley #8C jointer     $170

This has been my personal jointer for the last couple of years. I just bought a type 11 to take its place. I restored this back when I first got it.

Its been stripped and painted, Sole is flat, frog is flat, Iron needed some work, so look at the pictures, but it works great (angle was way to steep, and it hasn’t been ground out yet. A little each time goes away), iron has a small camber
i just refinished the knob and tote this morning, Brush oil and wax. Both are original rosewood
the tote has an epoxied repair (see photo)

 

———————————————————————————————————————————————————————-

BLOCK PLANES

———————————————————————————————————————————————————————-

Stanley #103   Stripped and left metal. Tuned. #25