A #3 Size Infill.

Here is a my latest masterpiece.

This is a #3 size. Donor sole is a defiance #3.
Wood is epoxied into the sole with the rear piece pinned as well.
Wood is wenge. Accent on front is Ash.
Bedded at 55 degrees.
Hock iron.
I made the chip breaker.
Finish is 1-1-1
Cap is brass.

WP_20130323_014WP_20130323_011WP_20130323_012

So here is the start of the chip breaker.

WP_20130322_020WP_20130322_021WP_20130322_022WP_20130322_023WP_20130323_006WP_20130323_007WP_20130323_008

 

This one didn’t make the cut. I opted for a single DW on the cap screw. I’ll save this for future use.

WP_20130316_013WP_20130323_002WP_20130323_009WP_20130323_010WP_20130323_003WP_20130322_024WP_20130323_004WP_20130317_003WP_20130323_011WP_20130323_012WP_20130323_014WP_20130323_013WP_20130323_015

This is smoothing some Ash

WP_20130323_005WP_20130323_017WP_20130323_016

A thicker take on some poplar

WP_20130323_018WP_20130323_019WP_20130323_020WP_20130323_021WP_20130323_022WP_20130323_023

And some oak to make sure its working as it should.

WP_20130323_024WP_20130323_026

Thanks for stopping by.

One Response to A #3 Size Infill.

  1. Dave says:

    I like the personal touch. Don your are getting better. Keep em coming.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: