A #4 infill Smoother. Shop made

I built this out of a Stanley #4 base. The base was broke at the rear handle bolt. Its bedded at 55 degrees. It has a SW cutter.

The wood is locust (stained with ebony) and bloodwood.

The cap bolt is through the wood with 3 countersunk nuts on the back side. Don’t ask why 3, I don’t really know.

The finish is a quick coat of blo with a few hours to dry and a few coats of Shellac.

At this point I’d estimate I have about 12 hours into this project with the 2 days I have into it.

Thanks for looking.